Pro-Fluo 150


The Pro-Fluo 150 phantom is dedicated for acceptance and constancy tests of radiography and fluoroscopy equipmentaccording to the new DIN 6868-150 standard.


For more information Click Here

Pro-RF MTF


Edge test device according to IEC 62220-1 for determination of Modulation Transfer Function that consists of a tungsten plate fixed on a lead plate.


​For more information Click Here

Pro-RF Stand


Spacer plate with adjustable legs for positioning Pro-Alpha and Pro-Digi test phantoms near the X-Ray tube on units without insertion slots (e.g. over-table / under-table tubes, C-arms etc.).


​For more information Click Here

Pro-RF Res 150


Phantom for acceptance and constancy testing of Cone-Beam CT / Volume Tomography (DVT) in fluoroscopyaccording to DIN 6868-150. 


​For more information Click Here

Pro-RF FocalSpot


Simple test device for the focal spot size evaluation. It consists of a precision bar pattern placed at the end of the cylinder that provides accurate and reproducible target-to-image receptor spacing.


​For more information Click Here

Pro-Digi


The Pro-Digi phantom is dedicated for acceptance and constancy tests of digital radiography equipment.


​For more information Click Here

Pro-RF Tomo


Set of simple tools dedicated for measurements on tomography X-Ray equipment. It may be used for the layer height adjustment and tomography movement tests.


For more information Click Here

Pro-RF DSA


A special phantom for Quality Assurance of Digital Subtraction Angiography Equipment (DSA) according to IEC 61223-3-3 and DIN 6868/Parts 8, (2007) and 54. The phantom contains a movable insert with aluminium strips to simulate blood vessels. This insert can be moved via pneumatic system from a safe distance during exposure.


​For more information Click Here

Pro-RF Al 21


21 mm aluminum filter with insertion frame for mounting near the X-Ray tube.


For more information Click Here

Pro-RF Rack


Phantom holder for Pro-Alpha, Pro-Digi and Pro-Fluo test phantoms for mounting on Bucky grid wall stands. It allows for precise and safe positioning.


​For more information Click Here

Pro-RF 21 Steps


21 step aluminium wedge for determination of the dose reproducibility and sensitometric curve shape, speed and mid-gradient of X-Ray screen-film radiography systems.


For more information Click Here

Pro-RF Mask Pb


„L”-shaped lead mask for testing chambers of the Automatic Exposure Control system.


For more information Click Here

Pro-RF HighRes


Test phantom for evaluation of high contrast resolution of fluoroscopy system in one exposition. It consists of eight patterns of wire mesh in a pie shape.


​For more information Click Here

Pro-RF GridAlign


This device improves alignment of the radiographics and central beam of the x-ray tube. It is designed to test proper grid alignment with respect to the central beam.


For more information Click Here

Pro-RF Contrast


A Contrast-Detail (CD) phantom makes it possible to quantify both detail and contrast as observed by the radiologist. It can be used within the entire range of radiography diagnostic imaging systems, such as fluoroscopy and angiography. It has 225 holes that generate subtle changes in contrast.


​For more information Click Here

Pro-RF FluoCDRH


Compact and easy to use phantom for performance evaluation of fluoroscopic systems according to Center for Devices and Radiological Health (CDRH) specifications. It also meets recommendations of AAPM Report No. 60 “Instrumentation Requirements of Diagnostic Radiological Physics”. It is optimized for both under- and over-table fluoroscopic tubes.


For more information Click Here

Pro-RF AAPM 15


This Digital Subtraction Angiography (DSA) Phantom follows the recommendation in Report No. 15 by the AAPM (American Association of Physicists in Medicine) - Digital Radiology/Fluorography Task Group of the Diagnostic X-Ray Imaging Committee. Phantom is designer to evaluate digital functions of DSA systems and can be used to check: contrast range, resolution, linearity, uniformity, amplifier dynamic range, registration accuracy and subtraction effectiveness. Its modular construction allows to setup up the desired test configuration in a very easy and accurate manner.


For more information Click Here

Pro-RF 11 Steps


11 step aluminium wedge for evaluation of dynamic range of digital or film-screen systems.


For more information Click Here

Pro-RF Contact


Test grid for testing cassette film – screen contact.


​For more information Click Here

Pro-RF AlphaG


The Pro-AlphaG phantom is a simple tool to check geometry of the R/F system: collimation / beam alignment and position and size of the effective radiation field.


For more information Click Here

Pro-RF Geometry


This device readily indicates a 1% or 2% misalignment at a 1m focal-film distance (FFD), but it may be used at any FFD. It consists of a flat 20 x 25 cm plate with a 14 x 18 cm pattern etched on its surface. It can also be used to check fluoroscopy alignment and collimation. 


​For more information Click Here

Radiography/Fluoroscopy

Pro-RF Ruler


The radiopaque ruler in the image provides a permanent reference of image size. It may be used to check the accuracy and position of the light field for quality control and adjustment as well as included during x-ray procedures, leaving a clear measurement right on the x-ray image itself. 


​For more information Click Here

Pro-RF Fluo18


Phantom for evaluation of imaging performance of fluoroscopic systems. It allows for brightness and contrast adjustments, circular geometry check (scanning linearity) plus wide-range low-contrast and high-contrast resolution evaluation. Available in two standard layouts plus any custom configuration.


For more information Click Here

Pro-RF AEC Cu


Set of high purity copper plates for testing Automated Exposure Control of radiography equipment. It can be mounted near the X-Ray tube and can be used instead of PMMA plates.


​For more information Click Here

Pro-RF Al 25


25 mm aluminum filter with insertion frame for mounting near the X-Ray tube.


​For more information Click Here

Pro-RF AAPM 31


Set of acrylic and aluminium filters for testing diagnostic X-rays according to AAPM recommendations from Report No. 31 ”Standardized Methods for Measuring Diagnostic X-Ray Exposure”. Patient-equivalent acrylic and aluminium phantoms provide the necessary attenuation between the source and AEC or ABC detectors.


For more information Click Here

Pro-RF CDR


Phantom for evaluation of imaging performance of radiographic systems. It allows for wide-range low-contrast and high-contrast resolution evaluation and sensitometric measurements. Available in standard layout plus any custom configuration.


For more information Click Here

Pro-Alpha


The Pro-Alpha phantom may be used for carrying out acceptance and constancy tests of conventional radiographyX-Ray units.


For more information Click Here

Pro-RF AEC PMMA


Set of acrylic plates for testing Automated Exposure Control of radiography equipment.


​For more information Click Here

Pro-RF XR21


The phantom has been designed in accordance with the NEMA XR21 standard. This modular phantom made of PMMA consists of several plates allowing variation of phantom thickness setup in steps of 25mm, up to a total of 300mm, simulating a range of patient sizes.


​For more information Click Here

Pro-RF ChestCDRH


Compact and easy to use phantom designed to invoke a response of automatic-exposure. Follows the Center for Devices and Radiological Health (CDRH) specifications of a chest phantom and AAPM recommendations from Report No. 31 ”Standardized Methods for Measuring Diagnostic X-Ray Exposure”. The adult chest phantom approximates a 173cm adult weighing approximately 165 lbs with an anterior-posterior (AP) thickness of about 23 cm. The anatomical region the phantom simulates is the lung field, and therefore contains an air gap within the center. The phantom is composed of polymethyl-methacrylate (PMMA).


For more information Click Here

​Pro-Fluo


The Pro-Fluo phantom is dedicated for acceptance and constancy tests of digital and analogue radiography and fluoroscopy equipment.


For more information Click Here